Brother FAX-2480C User Manual page 88

Error Message Cause
You tried to access a One-Touch or
Not
Speed Dial number that is not
Registered
programmed.
The machine's memory is full.
Out of Memory
Paper is jammed in the machine.
Paper Jam
The machine has a mechanical
Print Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
The machine has a mechanical
Scan Unable
problem.
XX
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Paper is not the correct size.
Wrong Paper
Size
80
Action
Set up the One-Touch or Speed Dial number.
(See Storing Speed-Dial numbers on page 44.)
Do one of the following:
Press Stop/Exit and wait until the other
operations in progress finish and then try
again.
Clear the data in the memory. To gain extra
memory, you can turn off Remote Fax
Option. (See Turning off Remote Fax
Options on page 48.)
Print the faxes that are in the memory. (See
Printing a fax from the memory on page 34.)
See Printer jam or paper jam on page 82.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 81 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 81 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Load the correct size of paper (Letter, Legal or
A4), and then press Mono Start or Colour Start.