Motorola MK4000 MicroKiosk Product Reference Manual page 92

B - 24 MK4000 MicroKiosk for CE .NET 5.0 Product Reference Guide
Pass-phrase Dialog
When you select
None
by checking the
Pass-phrase
radio button is only available if the authentication is
Pass-phrase
When you select
None
cannot enter a pass-phrase if the encryption is
When you select
None
cannot enter a pass-phrase if the encryption is
To enter a pass-phrase with characters hidden:
Select the
1. For added security - Mask characters entered
Tap .
2. Next
In the field, enter the key.
3. Key
For WEP-40 enter between 4 and 32 characters.
a.
For WEP-104 enter between 4 and 32 characters.
b.
For TKIP enter between 8 and 63 characters.
c.
For AES enter between 8 and 63 characters.
d.
In the
4. Confirm Key
Tap . The
5. Next
To enter a pass-phrase key without characters hidden:
Tap .
1. Next
In the field, enter the key.
2. Key
For WEP-40 enter between 4 and 32 characters.
a.
For WEP-104 enter between 4 and 32 characters.
b.
For TKIP enter between 8 and 63 characters.
c.
For AES enter between 8 and 63 characters.
d.
Tap . The
3. Next
as an authentication and
radio button. You are prompted to enter the pass-phrase. For WEP, the
as an authentication and
as an authentication and
field, re-enter the key. When the keys match a message appears indicating this.
dialog box displays.
IP Address Entry
dialog box displays.
IP Address Entry
as an encryption, you can choose to enter a pass-phrase
WEP
.
None
as an encryption, you must enter a pass-phrase. You
TKIP
and the authentication is anything other than
TKIP
as an encryption, you must enter a pass-phrase. You
AES
and the authentication is anything other than
AES
check box.
.
None
.
None