Security Mode - Motorola MK4000 MicroKiosk Product Reference Manual

B - 10 MK4000 MicroKiosk for CE .NET 5.0 Product Reference Guide
Ad-Hoc Channels
Table B-6
Band
5 GHz
Tap . The
2. Next

Security Mode

Use the Security Mode dialog box to configure the Security and Authentication methods. If you selected
Ad-Hoc mode, this dialog box is not available and authentication is set to None by default.
Security and Authentication Dialog Box
Figure B-7
Select the security mode from the Security Mode drop-down list. This selection affects the availability of other
choices for Authentication Type and Encryption methods.
LEGACY (Pre-WPA) - This mode allows you to configure protocols not available in the other Security
•
Mode selections: Open authentication / encryption, Open authentication with WEP40 or WEP128, and
802.1X authentications that use WEP128 encryption.
WPA-Personal - This mode allows you to configure a WPA-TKIP-PSK protocol.
•
WPA2-Personal - This mode allows you to configure WPA2-PSK protocols with either the Advanced
•
Encryption Standard (AES) or TKIP encryption method.
WPA-Enterprise - This mode allows you to configure profiles with 802.1X Authentication that uses WPA
•
and TKIP encryption method.
WPA2-Enterprise - This mode allows you to configure profiles with 802.1X Authentication that uses
•
WPA2 with AES encryption method.
Channel
36
40
44
48
dialog box displays. See
Encryption
Frequency
5180 MHz
5200 MHz
5220 MHz
5240 MHz
Encryption on page B-21 for encryption options.