Encryption - Motorola MK4000 MicroKiosk Product Reference Manual

Encryption

NOTE The only available encryption methods in Ad-hoc are Open, WEP40, and WEP104.
Use the dialog box to select an encryption method. This contains fields to configure the encryption
Encryption
method and corresponding keys, if any. The drop-down list includes encryption methods available for the selected
security mode and authentication type.
Encryption Dialog Box
Figure B-17
Based on the encryption method and the authentication type, you may have to manually enter pre-shared
encryption keys (or a passkey phrase). When you select any authentication type other than None, 802.1x
authentication is used and the keys are automatically generated.
Encryption Options
Table B-11
Encryption
Open Select
Selecting this option provides no security for data transmitting over the network.
WEP-40 (40/24) Select
generated automatically). Other controls appear that allow you to enter keys. If you select
the
characters long on the next page. Saving the profile converts the passphrase into a key
and the passphrase is lost. Also, if using a passkey, only one key can be set.
If you do not select the
on the next page. Select the key to enter in the
selects the key used for encryption. Note that Fusion sets default values for these keys, so
while that entry is not required, the keys must match the AP.
(the default) when no data packet encryption is needed over the network.
Open
to use 64-bit key length WEP encryption (the other 24 bits are
WEP-40 (40/24)
checkbox, you are asked to enter a passphrase between 4 and 32
Use Passkey
Use Passkey
Wireless Configuration B - 21
Description
checkbox, you can enter up to four hexadecimal keys
drop-down menu. This also
Key Index