Motorola MK4000 MicroKiosk Product Reference Manual page 59

Use the to define where to store all built partitions.
3. Build Path
Select (hex image) COMPRESSION to reduce the size and speed up the download.
4.
Click and follow the on-screen instructions.
5. OK
If one of the partitions is the ESSID, a prompt appears requesting the ESSID value. Deselect the HR (High
Rate) check box when building ESSID images for a device with an FH radio.
Build ESSID Partition Window
Figure 5-10
If one of the partitions is the Splash Screen, a prompt appears requesting both the source Bitmap file and the
destination HEX file.
TCM performs a check, and if there are no errors, creates the partition hex files.
6.
If the build fails, TCM does not create the hex files and displays an error message. Two common reasons for a
build failure are:
•
TCM could not find the files defined in the script. This error can occur when the files referenced by the script
are no longer stored on the development computer or the folders where they are stored were renamed.
•
The total amount of flash memory space that the script requires exceeds the image size. To correct this,
reduce the number of files in the partition or increase the size of the partition. See
on page 5-10 for more information about setting the image size appropriately.
Downloading the Image
After building the hex file, download it to the MK4000 using the developer cable:
Remove power from MK4000.
1.
Connect a DB9 cable to the RJ45 port on the MK4000, and the other end to the host computer.
2.
Connect the developer cable to the mini USB host/client port (the mini USB port closest to the MicroSD card
3.
slot) on the MK4000.
Connect the other end of the developer cable to the USB port on the host computer.
4.
On the host computer open a terminal emulation program such as Hyperterminal. Configure the selected port
5.
as follows:
•
Baud rate: 38400
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
Connect power to the MK4000. The download prompt
6.
Application Deployment 5 - 13
appears.
}}}
Defining Script Properties