Drag the desired file(s) from the host computer to the desired mobile device folder.
4.
•
Program Files folder: files stored in this folder are discarded after a cold boot.
•
Application folder: files stored in this folder are retained after a cold boot.
NOTE Cold booting the MK4000 erases all files in RAM. Be sure to save any critical files in the Application folder,
e.g., radio profile, time zone setting, license keys. See
OS Update
To upgrade the operating system using an SD card,
Install the DCP onto the desktop computer.
1.
NOTE If you use a firewall, the firewall may prevent some files from installing. To verify that the DCP installation
completes, ensure the following folder contains files, and is not empty:
<Your drive:>\Program Files\Symbol Device Configuration Package\MK4000c50\<version number folder>
\OSUpdate\Images.
Insert an SD card with at least 16 MB of storage into the MK4000. See the
2.
2-2.
Connect the MK4000 to power and to the desktop computer via a USB cable, and set up a partnership
3.
between the two computers using ActiveSync. See
In the ActiveSync window on the desktop computer, select Explore.
4.
On the drive in which you installed the DCP (typically C:), navigate to the directory:
5.
\Program Files\Symbol Device Configuration Packages\MK4000c50\V1.0\
Copy the OSUpdate folder into the My Device\SC Card\ folder on the MK4000.
6.
On the MK4000, tap Start > Programs > Windows Explorer.
7.
Navigate to \SD Card\OSUpdate folder.
8.
Double-tap the MK4000c50BenColor_SD.LNK file.
9.
After the update completes and the MK4000 reboots, remove the SD card.
10.
Application Deployment
Downloading Files to the MK4000 on page
Inserting a Micro SD Card on page
ActiveSync on page
5-5.
5 - 7
5-6.