Motorola MK4000 MicroKiosk Product Reference Manual page 85

Username Dialog Box
Figure B-11
Password
Use the dialog box to enter a password. If EAP/TLS is the selected authentication type, the password
Password
dialog box does not appear. Note that if you entered a username but no password, Fusion assumes that no
password is a valid password.
Password Dialog Box
Figure B-12
Enter a password in the
1.
dialog box appears, with two radio buttons to allow you to choose a token or static password.
•
Choose the
Token
software). The system administrator supplies a token generator for use with EAP-GTC token profiles. A
token generator generates a numeric value to enter in the password field at connect time, usually along
with a PIN. Tokens usually expire within 60 seconds. The token generator is time-synchronized with a
token server. When authenticating, the RADIUS server asks the token server to verify the token entered.
The token server knows what value the token generator generates given the time of day and the
username. Since tokens expire, EAP-GTC token profiles are treated differently. A prompt appears at the
appropriate time to enter a token, even if you previously entered a token. Tokens are never cached in the
credential cache (though the username entered when the token is entered is cached).
•
If you choose the
desired. A profile that uses an EAP-GTC tunnel type with a static password is handled in the same
manner as other profiles that have credentials that don't expire.
Select the
2. Advanced ID
Tap . The
3. Next Prompt for Login
field. If using the authentication tunnel type EAP-GTC, a
Enter Password
radio button when using the profile in conjunction with a token generator (hardware or
radio button, the
Static Enter Password
check box if advanced identification is desired.
at dialog box displays. See
Wireless Configuration B - 17
field is enabled and you can enter a password if
Credential Cache Options.
Password