Hydraulic Or Manual Lift - RHINO Turbo 120 Operator's Manual

ASSEMBLY

HYDRAULIC OR MANUAL LIFT

Attach the Spring Assembly option (Asm-R-0291) to the lug on the mower deck behind the Center Gearbox.
Retain using pin and cotter pin. Install the Hydraulic Cylinder (Asm-R-0291) or the manual Ratchet Lift Screw
(Asm-R-0292) 1"x2 3/4 between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten
all Bolts securely.
WHEELS
Install the Wheels on the Wheel Hubs.
Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel.
Note: the direction of travel and curvature of rubber segments in tire and install as shown in FIGURE Asm-R-
0127
TURBO 120 08/12 Assembly Section 3-6
© 2012 Alamo Group Inc.