Tongue - RHINO Turbo 120 Operator's Manual

ASSEMBLY

TONGUE

Insert tongue lugs between mainframe uprights and retain using Bushings & Special Pins. Insert Retaining Clip
to Special Pins. Figure Asm-R-0308.
AXLE ASSEMBLY
Attach the Rear Axle to the lugs on the rear of the Mainframe using (4) 3/4 x 3-1/2 bolts (#1), (1) 3/4 x 3 bolt
(#2), (5) bushings (#3), (5) Locknuts (#4) and (4) Flatwashers. Figure Asm-R-0309.
AXLE ARMS
Attach the Axle Arms (10) to the Main Axle (9) by attaching the axle arm (10) and axle arm plate (8) with bolt
(7) and locknut (17). Then attach Spindle Hub Assembly (3) to axle arm (10) with bolt (14) and locknut (13).
Figure Asm-R-0310
TURBO 120 08/12 Assembly Section 3-4
© 2012 Alamo Group Inc.