Gearbox - RHINO Turbo 120 Operator's Manual

MAINTENANCE

GEARBOX

The Gearbox has been filled with lubricant to the Dipstick level prior to shipment. However, you should check
the oil level at Dipstick before operating, and frequently thereafter.
The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking. It is
recommended that the Dipstick be removed after every 8 to 10 hours of operation and oil added until it is at
proper level. MntP-R-0052, MntP-R-0053.
SECONDARY GEARBOX CENTER GEARBOX
Required lubricant is Multi-Purpose Gear Oil P/N 00786250. The outer gearbox capacity is 6-1/2 quarts and
the center gearbox has a capacity of 5 quarts.
NOTE: Overfilling the Gearbox will cause pressure to build up and cause Oil Seals to leak.
ATTENTION: If the Gearbox suddenly starts making an unusual noise, stop at once, check for leaks, and refill
Gearbox as required.
TURBO 120 08/12 Maintenance Section 5-8
© 2012 Alamo Group Inc.