Result Codes - Fujitsu Docomo F-07F Instruction Manual

Result codes

When ATV command is set to n=1 (default), the result code is displayed in alphabetic characters. When
the command is set to n=0, the result code is displayed numerically.
Result codes
No. Text display
0 OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
6 NO DIALTONE
7 BUSY
8 NO ANSWER
100 RESTRICTION
101 DELAYED
Extended result code
When AT&E is set to n=0
No. Text display
122 CONNECT 64000
125 CONNECT 384000
133 CONNECT 3648000
135 CONNECT 7232000
When AT&E is set to n=1
No. Text display
5 CONNECT 1200
10 CONNECT 2400
11 CONNECT 4800
13 CONNECT 7200
12 CONNECT 9600
15 CONNECT 14400
16 CONNECT 19200
17 CONNECT 38400
18 CONNECT 57600
19 CONNECT 115200
20 CONNECT 230400
21 CONNECT 460800
* To retain compatibility with a modem connected via conventional RS-232C, communication speed is displayed, but it
differs from the actual connection speed because FOMA terminal is connected to a PC with a USB cable or Bluetooth
function.
Communication protocol result code
No. Text display
1 PPPoverUD
3 AV64K
5 PACKET
Operation performed normally
Terminal connected to other party
Incoming call
Line disconnected
Unable to accept command
Unable to detect dial tone
Detecting the busy tone
Completed connection Time-out
Network restriction in place (The communication network is
busy. Please wait for a while and retry.)
Redial call restricted
Connection speed between FOMA terminal and base station
64000bps
384000bps
3648000bps
7232000bps
Connection speed between FOMA terminal and a PC
1200bps
2400bps
4800bps
7200bps
9600bps
14400bps
19200bps
38400bps
57600bps
115200bps
230400bps
460800bps
Connect via 64K data communication (BC=UDI, +CBST=116,1,0)
Connect via 64K videophone
Connect via packet communication
34
P27
Meaning
Meaning