Fujitsu Docomo F-07F Instruction Manual page 125

Upper slot : Command
Lower slot : Example
AT+GMI
AT+GMI
FUJITSU
OK
AT+GMM
AT+GMM
FOMA F07F
OK
AT+GMR
AT+GMR
Ver1.00
OK
*1
AT+IFC=<n,m>
AT+IFC=2,2
OK
*1
AT+WS46=<n>
AT S
AT S
E1 Q0 V1 X4 &C1 &D2
&S0 (snip)
S104=001
OK
*1
AT V<n>
AT V0
OK
+++
+++ (not displayed)
OK
*1 Registered in FOMA terminal by &W command.
*2 Not reset by &F and Z commands.
*3 When Z command is executed before the &W command, the terminal is reset to the last status registered in memory, and
prior changes are erased.
Disconnection reason list
Packet communication
Value
26 APN is not present or is incorrect.
27
30 Disconnected by network.
33 Terminal does not subscribe to packet communication.
36 Normal disconnection.
Display FOMA terminal manufacturer name.
Display model name of FOMA terminal.
Display FOMA terminal version.
Set how to control local flow between a PC and FOMA terminal.
n, m=0 : No flow control
n, m=2 : RS/CS (RTS/CTS) Perform flow control (default)
AT+IFC? : Display the current settings and status in the "+IFC : <n>,<m>" format (n is the
value of DCE by DTE, and m is the value of DTE by DCE)
AT+IFC=? : List of the settable values is displayed
Display wireless network used when sending communication in n number.
When entering AT+WS46=<n>, ERROR is returned because it cannot be changed.
n=12 : GSM network n=22 : 3G network (FOMA)
n=25 : GSM or 3G network (FOMA) (fixed value)
AT+WS46? : Display current settings
Display the currently set commands and S register settings.
Set whether to use expanded result codes when connection is made.
n=0 : Not use expanded result codes (default)
n=1 : Use expanded result codes
Move from online data mode to online command mode when entered during a
communication.
The escape guard interval is 1 second (fixed value).
31
Description
n, m=1 : Perform XON/XOFF flow control
AT+WS46=? : Display a list of assignable values
Description