Fujitsu Docomo F-07F Instruction Manual page 123

Upper slot : Command
Lower slot : Example
*1
AT+CBST=<n>,1,0
AT+CBST=116,1,0
OK
*1
AT+CDIP=<n>
AT+CDIP=0
OK
AT+CEER
AT+CEER
+CEER : 36
OK
*2
AT+CGDCONT
P32
*2
AT+CGEQMIN
P33
*2
AT+CGEQREQ
P33
AT+CGMR
AT+CGMR
1234567890123456
OK
*1
AT+CGREG=<n>
AT+CGREG=0
OK
AT+CGSN
AT+CGSN
123456789012345
OK
*1
AT+CLIP=<n>
AT+CLIP=0
OK
*2
AT+CLIR=<n>
AT+CLIR=2
OK
*1
AT+CMEE=<n>
AT+CMEE=0
OK
Set the line to use (Setting of bearer service)
n=116 : 64K data communication (default)
AT+CBST? : Display current settings
Set to notify/not to notify the sub address when receiving in packet communication or 64
data communication. And, subscription status of Multi Number can be confirmed.
n=0 : The information of sub address is not displayed. (default)
n=1 : The information of sub address is displayed.
m=0 : Multi Number not subscribed.
AT+CDIP? : Display the current settings and status in the "+CDIP:<n>,<m>" format
AT+CDIP=? : List of the settable values is displayed.
Display the reason of immediate disconnection.
Disconnection reason list
Set dialup connection (APN) for packet communication.
Set the criteria for judging whether to permit QoS (Quality of Service) provisioned by the
network when packet communication is established.
Set QoS (Quality of Service) requested to the network at the transmission of packet
communication. P33
Display FOMA terminal version.
Set whether to report network service registration status (Within/Out).
n=0 : Not notified (default)
n=1 : When the terminal is moved from Within service area to Out of service area or vice
versa, the status is reported in the "+CGREG : <stat>" format.
stat=0 : Out of packet service area
stat=4 : Unknown
stat=5 : Within packet service area (during international roaming)
AT+CGREG? : Display the current settings and status in the "+CGREG : <n>,<stat>" format
AT+CGREG=? : Display a list of assignable values
Display FOMA terminal serial No.
Set whether to display sender's caller ID on a PC when receiving 64K data communication.
n=0 : Not display result (default)
m=0 : Network setting not to send caller ID
m=1 : Network setting to send caller ID
AT+CLIP? : Display the current settings and status in the "+CLIP : <n>,<m>" format
AT+CLIP=? : Display a list of assignable values
Set Caller ID notification when sending 64K data communication.
n=0 : Use the setting in Caller ID notification of FOMA terminal
n=2 : Send (default)
m=0 : CLIR not operating (always sends)
m=2 : Unknown m=3 : CLIR temporary mode (default=does not send)
m=4 : CLIR temporary mode (default=sends)
AT+CLIR? : Display the current settings and status in the "+CLIR : <n>,<m>" format
AT+CLIR=? : Display a list of assignable values
Set whether to display an error report at FOMA terminal.
n=0 : Display "ERROR" and no result code (default)
n=1 : Use result code, displaying reason as number
n=2 : Use result code, displaying reason as alphabetic characters
Display reasons in the "+CME ERROR : xxxx" format when n=1 or n=2 is set (xxxx = number
or alphabetic characters).
AT+CMEE? : Display current settings
Description
n=134 : 64K videophone
AT+CBST=? : Display a list of assignable values
m=1 : Multi Number subscribed.
P31
stat=1 : Within packet service area
n=1 : Display result
m=2 : Unknown
m=1 : CLIR operating (never sends)
P32 "Error messages list"
AT+CMEE=? : Display a list of assignable values
29
P32
P33
n=1 : Not send