Installing Foma Communication Configuration File (Driver) - Fujitsu Docomo F-07F Instruction Manual

Inserting USB cable
1
Insert the connector of the USB cable with engraved side up into FOMA
terminal's external connection jack horizontally.
2
Insert the other end of the USB cable connector into the PC USB port.
When a PC and FOMA terminal are connected,
terminal.
❖
Removing USB cable
1
Press the USB cable's release buttons on both sides of the connector and
remove the connector from FOMA terminal horizontally.
2
Remove the USB cable out from the PC.
✔INFORMATION
Be careful not to give excessive force to the connecter of the USB cable when connecting/disconnecting the cable
to/from FOMA terminal.
When disconnecting the connector, be sure to pull it straight while pressing the release button. Applying an
excessive force to disconnect the connector may give damage to it.
Do not remove the USB cable during data communication. The data communication is disconnected and it may
cause data loss or malfunction.
Installing FOMA communication configuration file
(driver)
To make data communication by connecting FOMA terminal and a PC with USB cable, FOMA
communication configuration file (driver) is required. Install the file before connecting FOMA
terminal for the first time to the PC.
Before operating, refer to "Precautions for installation/uninstallation".
For without using USB cable, installing FOMA communication configuration file (driver) is not required.
Do not connect FOMA terminal until a message that instructs you to connect FOMA terminal to a PC
appears in Step 5.
1
Download FOMA communication configuration file (driver) from NTT
DOCOMO website and decompress.
https://www.nttdocomo.co.jp/support/utilization/application/foma/com_set/driver/index.html (In
Japanese only)
Before downloading, check model name of FOMA terminal.
2
Double-click the decompressed file
Select "f-07f_driver_32" for 32-bit OS, or select "f-07f_driver_64" for 64-bit OS.
3
In the window displayed, double-click the "F07Fst.exe" icon.
4
Click "
5
When a message indicating to connect FOMA terminal to the PC appears,
connect FOMA terminal to the PC.
Connect FOMA terminal while the power is ON.
6
On the Installation completion screen, click "OK".
appears on the stand-by display of FOMA
Select a file which your PC is applied to.
(Start installation)".
6
P5