Fujitsu Docomo F-07F Instruction Manual page 27

Before Using
Charging
The battery pack does not have a full charge at time of purchase. Use AC adapter for FOMA terminal to
charge the battery before using FOMA terminal.
Charging using desktop holder
a
Insert the connector of AC adapter
horizontally to the accessory desktop
holder, with the arrows mark side
upward
b
Unfold the power plug and insert it into
a 100V AC outlet
c
Close FOMA terminal and insert it into
the desktop holder
* Make sure the orientation of FOMA terminal is
correct and insert it properly. Installing with
excessive force may cause damage.
d
Check that the charging light turns on
* After charging is completed, remove FOMA terminal from the desktop holder.
Charging using AC adapter
a
Open the external connection jack cap
(a), hold the connector horizontally
with the arrows side upward and insert
it to the jack (b)
b
Unfold the power plug and insert it into
a 100V AC outlet
c
Check that the charging light turns on
* When charging is over, pull out the power plug from
the outlet, and pull out from FOMA terminal
horizontally while pressing the release buttons on both sides of the connector.
AC adapter
d
Release
buttons
Connector
c
Desktop holder
a
Connector
Release
buttons
External
connection jack External connection
AC 100V
outlet
b
a
b
c
AC
AC 100V
adapter
outlet
jack cap
25