Caller Id Notification - Fujitsu Docomo F-07F Instruction Manual

Before Using
Power ON - Default setting
Initial setting is an operation when FOMA terminal
is turned ON for the first time.
a f (2 sec. or more)
The Initial setting screen appears.
b
Set required itemseC [Complete]
If you exit without setting Change security
code and Request permit/deny, Initial setting
screen reappears when the power is turned
ON the next time.
c
On a confirmation screen of software
update function, geOn the
confirmation screen of Error info send
set., g
The stand-by display appears.
Point
If no operation is performed, the display light is
automatically turned off according to the settings in
Light time-out or eco mode setting. The display light
turns on again if there is any operation or incoming
call.
The battery usage state is automatically recorded
while using the FOMA terminal. The record is used
only for repair diagnosis.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehib
Changing screen display to English :
mehddeSelect "English"
26
Before Using

Caller ID notification

Set whether to notify your phone number (caller
ID) to the other party's terminal when making a
voice call.
meg TEL functioned Dial/
a
Receive call settingec Caller ID
notificationeb Settingea ON
OFF
Point
If you hear an announcement of requesting caller ID
when making a call, set Caller ID notification or add
prefix "186" to the phone number to call again.
Before Using
Checking Profile
Check a model name or own phone number.
a me0 Profile
User information screen appears.
Point
Editing the profile : On User information screen,
CeAuthenticateeSet required itemseC
On the profile edit screen, select first mail address
then select "Acquire Auto" to obtain your mail
address from the i-mode center. For details of
changing a mail address, refer to NTT DOCOMO
website.
Checking a phone number during a call : se0
b
or