KYMCO SUPER8 50 Service Manual page 33

2
. FRAME COVERS/EXHAUST MUFFLER
Discornnect the seat lock wire.
Discornnect the tail lamp wire connectors
Remove the left and right body cover
The installation sequence is the reverse of
remove
During removal, do not pull the joint
claws forcedly to avoid damage.
When installing, be sure to connect the
seat lock wire.
FLOOR BOARD REMOVAL
Remove the rear carrier. ( 2-3)
Remove the met-in box. ( 2-3)
Remove the frame body cover. ( 2-4)
Remove the four bolts attaching the floor
board.
Remove the floor board.
F RONT FENDER AND UNDER COWL
REMOVAL
Remove the two on the under cowl.
Remove the under cowl.
Remove the L/R side bolts attaching the front
fender and front fender.
LEG SHIELD REMOVAL
Remove the two clip body on the lid leg
shield
Remove the lid leg shield.
The installation sequence is the reverse of
remove
2-5
Seat Lock Wire
Bolts
Floor Board.
Under Cowl
Bolt
Clip Body.
SUPER8 50
Screws
Front Fenderl
Lid Leg Shield.