Engine Removal/Installation - KYMCO SUPER8 50 Service Manual

6

. ENGINE REMOVAL/INSTALLATION

SUPER8 50
ENGINE REMOVAL
Disconnect the battery negative cable.
Remove the frame body cover. ( 2-3)
Disconnect the spark plug high tension wire.
Disconnect the auto bystarter wire connector.
Disconnect the A.C. generator wire
connector.
A C G Wire Connector
Disconnect the starter motor cable and earth
cable from the starter motor.
Remove the fuel tube.
Starter Motor Cable
Earthr Cable
fuel tube
Remove the spark plug cap.
Spark Plug High Tension Wire
Band
Vacuum Tube
Disconnect the vacuum tube.
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Adjusting Nut
Lock Nut
6-2