Engine Installation - KYMCO SUPER8 50 Service Manual

6
. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER BRACKET
REMOVAL
Remove the return spring from the main
stand.
Remove the main stand.
Remove the engine hanger bracket bolts and
engine hanger bracket.
Inspect the engine hanger bushings and
stopper spring for wear or damage.
ENGINE HANGER BRACKET
INSTALLATION
Install the engine hanger bracket to the
chassis and tighten the bolt.
Install the main stand onto the engine and
install the return spring.

ENGINE INSTALLATION

Install the engine and tighten the engine
mounting bolt.
Torque: 4.5~5.5kgf-m
Tighten the rear shock absorber upper mount
bolt.
Torque: 4.5~5.5kgf-m
Main Stand
Bushing
Stopper Spring
Main Stand Return Spring
Engine Mounting Bolt
Engine Hanger Bracket Bolt
SUPER8 50
Return Spring
6-4