Accelerating Pump - KYMCO SUPER8 50 Service Manual

5
. FUEL SYSTEM

ACCELERATING PUMP

DISASSEMBLY
Remove the two accelerating pump cover
screws and accelerating pump cover.
Remove the spring and accelerating pump
diaphragm.
INSPECTION
Inspect the accelerating pump diaphragm
for cracks, damage or deterioration.
Replace if necessary.
Check each accelerating pump fuel passage
for clogging
Clean and blow them open with compressed
air.
Install the accelerating pump in the reverse
order of removal.
Be careful not to damage the diaphragm
during installation.
Screws
Diaphragm
Compressed Air Compressed Air
SUPER8 50
Diaphragm
5-10