VLAN Mode Setting
Mode: You can enable or disable the VLAN here.
Management VID
VID: Set the management VLAN of the IAP-2000.
VLAN Member Configuration
Object
VLAN Group:
VID:
Port 1~4:
PVID:
Port Priority:
Click Apply to make the configuration take effect. Click Cancel to cancel the new configuration.
Figure 4-28
Description
You can select enable or disable.
Set the VID here for each Virtual LAN.
It means the LAN port on the IAP-2000.
You can set the PVID for each port here.
You can decide the priority of each port here.
-66-
User's Manual of IAP-200x Series