4.6.2. Port Setting
Users can enable or disable each port, and configure the related settings in this page.
Fast Ethernet Port Configuration
Object
Port
Mode:
Flow Control:
Port Enable:
Click Apply to make the configuration take effect. Click Cancel to cancel the new configuration.
4.6.3. VLAN Setting
Setting up Virtual LAN on the IAP-2000 increases the efficiency of the network by dividing the LAN into logical
segments. The submenus of VLAN option is shown below:
Figure 4-27
Description
This is the LAN port number for this row.
You can select Auto Negotiation, 100 Full, 100 Half, 10 Full, and 10 Half.
You can choose Enable or Disable.
You can choose Enable or Disable.
-65-
User's Manual of IAP-200x Series