1. Manuals
  2. Brands
  3. Planet Networking & Communication Manuals
  4. Wireless Access Point
  5. WDAP-C7200E
  6. User manual

Planet Networking & Communication WDAP-C7200E User Manual

1200mbps 802.11ac dual band ceiling-mount wireless access point
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Planet Networking & Communication WDAP-C7200E

Summary of Contents for Planet Networking & Communication WDAP-C7200E

  • Page 2 Copyright Copyright  2018 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
  • Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User Manual of PLANET 802.11ac Dual Band Ceiling-mount Wireless Access Point Model: WDAP-C7200E Rev: 1.0 (July, 2018) Part No. EM-WDAP-C7200E_v1.0...

  • Page 4: Table Of Contents

    CONTENTS Chapter 1.Product Introduction ......................1 Package Contents ....................... 1 Product Description ......................2 Product Features ......................... 6 Product Specifications ....................... 7 Chapter 2.Hardware Installation ......................10 Product Outlook ........................ 10 Chapter 3.Connecting to the AP ......................13 System Requirements ...................... 13 Installing the AP ........................
  • Page 5 Q1: How to Set Up the AP Client Connection ................64 Q2: How to Set Up the WDS Connection ................. 69 Appendix B: Troubleshooting ......................74 Appendix C: Glossary ......................... 76...
  • Page 6 FIGURE Figure 2-1 WDAP-C7200E Triple View ....................10 Figure 2-2 WDAP-C7200E Front Panel ....................11 Figure 2-3 WDAP-C7200E Rear Panel ....................12 Figure 3-1 Fix it with the screws ......................13 Figure 3-2 Connect the Ethernet cable ....................14 Figure 3-3 Connect the PoE injector ....................14 Figure 4-1 TCP/IP Setting ........................
  • Page 7 Figure 5-31 Upgrade Firmware ......................46 Figure 5-32 System ..........................46 Figure 5-33 User ..........................48 Figure 6-1 System Tray – Wireless Network Icon ................49 Figure 6-2 Choosing a Wireless Network ..................... 49 Figure 6-3 Entering the Network Key ....................50 Figure 6-4 Choosing a Wireless Network -- Connected ...............

  • Page 8: Chapter 1.Product Introduction

    User Manual of WDAP-C7200E Chapter 1. Product Introduction Package Contents Thank you for choosing PLANET WDAP-C7200E Wireless AP. Please verify the contents inside the package box. Package Contents of WDAP-C7200E WDAP-C7200E Quick Guide Ethernet Cable Mounting-Kit If there is any item missing or damaged, please contact the seller immediately.

  • Page 9: Product Description

    To meet enterprise demand for wireless communication, PLANET WDAP-C7200E 1200Mbps Dual Band 802.11ac Wireless AP supports central management through PLANET AP controllers. With IEEE 802.11ac 2T2R dual-band technology, the WDAP-C7200E provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz.
  • Page 10 WDAP-C7200E can be powered and networked by a single UTP cable, effectively eliminating the needs of dedicated electrical outlets on the ceiling and reducing the cabling cost. Furthermore, the system administrator is able to arrange the PoE schedule of the WDAP-C7200E by working with the managed PoE switch.
  • Page 11 User Manual of WDAP-C7200E Easy Installation and Management With user-friendly Web UI and step-by-step Quick Setup Wizard, the WDAP-C7200E is easy to install, even for users who never experience setting up a wireless network. Furthermore, you can simply install our software...
  • Page 12 User Manual of WDAP-C7200E Multiple Operation Modes for Various Applications WDAP-C7200E supports AP, Gateway, WDS Bridge PtP, WDS Bridge PtMP and Repeater modes, through which it provides more flexibility for users when wireless network is established. Compared with general wireless access points, the WDAP-C7200E offers more powerful and flexible capability for wireless clients.

  • Page 13: Product Features

    User Manual of WDAP-C7200E Product Features  Industrial Compliant Wireless LAN and LAN  Compliant with the IEEE 802.11a/b/g/n/ac wireless technology  Equipped with 10/100/1000Mbps RJ45 ports, auto MDI/MDI-X supported  RF Interface Characteristics  802.11ac 2T2R MIMO architecture with data rate of up to 1200Mbps (300Mbps at 2.4GHz and 867Mbps at 5GHz) ...

  • Page 14: Product Specifications

    User Manual of WDAP-C7200E Product Specifications WDAP-C7200E Product 1200Mbps 802.11ac Dual Band Ceiling-mount Wireless Access Point Hardware Specifications 2 x 10/100/1000BASE-T RJ45 port Interfaces Auto-negotiation and Auto MDI/MDI-X Antennas Gain: 4 x Internal 5dBi antenna (2.4G x2, 5G x2) Reset button on the rear side (Press over 15 seconds to reset the device to factory...
  • Page 15 User Manual of WDAP-C7200E ETSI: < 20dBm (EIRP) (dBm) Network Mode Data Rate Receive Sensitivity (dBm) 2.4GHz 1Mbps 802.11b 11Mbps 6Mbps 802.11g 54Mbps MCS0/MCS8 802.11n HT20 MCS7/MCS15 MCS0/MCS8 802.11n HT40 MCS7/MCS15 5GHz 6Mbps Receive Sensitivity 802.11a 54Mbps MCS0/MCS8 802.11n HT20...
  • Page 16 User Manual of WDAP-C7200E Wireless MAC address filtering User Isolation Max. SSIDs Max. Clients 64 per radio (50 is suggested, depending on usage) Max. WDS Peers Wireless QoS Supports Wi-Fi Multimedia (WMM) WMM (Wi-Fi Multimedia): 802.11e Wireless QoS Multiple SSID: up to 4 at 2.4GHz and 5GHz, respectively...

  • Page 17: Chapter 2.Hardware Installation

    User Manual of WDAP-C7200E Chapter 2. Hardware Installation Product Outlook WDAP-C7200E  Dimensions: 198 x 28mm  Weight: 498 ±5g  Triple View Figure 2-1 WDAP-C7200E Triple View -10-...
  • Page 18 User Manual of WDAP-C7200E  Front Panel Figure 2-2 WDAP-C7200E Front Panel LED Definition STATUS FUNCTION The access point is on. System is operating. 2.4GHz wireless LAN is initializing. 2.4G Blinking 2.4GHz wireless LAN is working. 5GHz wireless LAN is initializing.
  • Page 19 User Manual of WDAP-C7200E  Rear Panel Figure 2-3 WDAP-C7200E Rear Panel Port definition Object Description 12V DC 12V DC port for the power adapter The access point is on. LAN port with Power over Ethernet (PoE) IN LAN port connecting to the network equipment.

  • Page 20: Chapter 3.Connecting To The Ap

    PCs running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or later, Linux, UNIX or other platforms compatible with TCP/IP protocols 1. The AP in the following instructions refers to PLANET WDAP-C7200E. 2. It is recommended to use Internet Explorer 11, Firefox or Chrome to access the AP.
  • Page 21 User Manual of WDAP-C7200E Step 2. Load the device into the mounting bracket, and be sure the device is mated with fixed screws. Then, lock the device in position and plug the Ethernet cable into the WDAP-C7200E. Figure 3-2 Connect the Ethernet cable Step 3.

  • Page 22: Chapter 4.Quick Installation Guide

    These values can be changed as you want. In this guide, we use all the default values for description. Connect the WDAP-C7200E with your PC by an Ethernet cable plugging in LAN port on one side and in LAN port of PC on the other side. Please power on the WDAP-C7200E by PoE switch through the PoE port.
  • Page 23 User Manual of WDAP-C7200E Figure 4-1 TCP/IP Setting Now click OK to save your settings. Now, you can run the ping command in the command prompt to verify the network connection between your PC and the AP. The following example is in Windows 10 OS. Please follow the steps below: Click on Start >...
  • Page 24 User Manual of WDAP-C7200E Figure 4-2 Windows Start Menu Open a command prompt, type ping 192.168.1.253 and then press Enter. If the result displayed is similar to Figure 4-3, it means the connection between your PC and the AP has been established well.
  • Page 25 User Manual of WDAP-C7200E If the result displayed is similar to Figure 4-4, it means the connection between your PC and the AP has failed. Figure 4-4 Failed Result of Ping Command If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some firewall software programs may block a DHCP request on newly installed adapters.

  • Page 26: Starting Setup In The Web Ui

    User Manual of WDAP-C7200E Starting Setup in the Web UI It is easy to configure and manage the AP with the web browser. Step 1. To access the configuration utility, open a web-browser and enter the default IP address http://192.168.1.253 in the web address field of the browser.

  • Page 27: Chapter 5.Configuring The Ap

    Chapter 5. Configuring the AP This chapter delivers a detailed presentation of AP’s functionalities and features 3 main items below, allowing you to manage the AP with ease. The screenshots use the WDAP-C7200E as an example. Figure 5-1 Main Menu...

  • Page 28: Wizard

    User Manual of WDAP-C7200E Wizard The Wizard guides you to configuring the WDAP-C7200E in a different mode, including Gateway, Repeater, AP and Super WDS mode. Figure 5-2 Operation Mode The default operation mode is Super WDS. -21-...

  • Page 29: Gateway Mode (Router)

    User Manual of WDAP-C7200E Gateway Mode (Router) Click “Wizard”  “Gateway Mode” and the following page will be displayed. This section allows you to configure the Gateway mode. Figure 5-3 Gateway Mode -22-...

  • Page 30: Wan Settings

    User Manual of WDAP-C7200E 5.2.1 WAN Settings Static IP If your ISP offers you static IP Internet connection type, select “Static IP" and then enter IP address, subnet mask, default gateway and primary DNS information provided by your ISP in the corresponding fields.

  • Page 31: Wireless

    User Manual of WDAP-C7200E DHCP Choose “DHCP” and the router will automatically obtain IP addresses, subnet masks and gateway addresses from your ISP. Figure 5-6 Gateway – DHCP 5.2.2 Wireless Figure 5-7 Gateway – Wireless The page includes the following fields:...

  • Page 32: Repeater Mode (Universal Repeater)

    User Manual of WDAP-C7200E Repeater Mode (Universal Repeater) Click “Wizard”  “Repeater Mode” and the following page will be displayed. This section allows you to configure the Repeater mode. Figure 5-8 Repeater Mode -25-...
  • Page 33 User Manual of WDAP-C7200E The page includes the following fields: Object Description Wireless Repeater Select “2.4G” or “5.8G” wireless LAN. Repeater SSID Enter the root AP’s SSID or press “Scan AP” to select. Lockmac Check to lock the root AP MAC address.
  • Page 34 User Manual of WDAP-C7200E Select the authentication and bandwidth which are the same as root AP to establish the connection. Figure 5-10 Repeater Mode -- Select AP Configure wireless settings for 5G signal Figure 5-11 Repeater Mode – Configure 5G Wireless...
  • Page 35 User Manual of WDAP-C7200E The page includes the following fields: Object Description WLAN Status Select ON or OFF to enable or disable wireless LAN. Wireless Analyzer Press the button to check your wireless environment. SSID It is the wireless network name. The default SSID is PLANET_5G.

  • Page 36: Ap Mode

    User Manual of WDAP-C7200E AP Mode In the AP mode, the AP wireless interface and cable interface bridge together. Click “Wizard”  “AP Mode” and the following page will be displayed. This section allows you to configure the AP mode.
  • Page 37 User Manual of WDAP-C7200E The page includes the following fields: Object Description WLAN Select “ON” or “OFF” to enable or disable 2.4G or 5.8G wireless LAN. Wireless Analyzer Press the button to check your wireless environment. Status SSID It is the wireless network name. The default SSID is “PLANET_2.4G” or “PLANET_5G”.

  • Page 38: Super Wds Mode (Wds Bridge In Ptp/Ptmp)

    User Manual of WDAP-C7200E Super WDS Mode (WDS Bridge in PtP/PtMP) In the Super WDS mode, the wireless interface can be connected with other wireless APs through WDS, and the wireless interface and cable interface. Click “Wizard”  “Super WDS Mode” and the following page will be displayed.
  • Page 39 User Manual of WDAP-C7200E Figure 5-14 Super WDS Mode The page includes the following fields: Object Description 2.4GHz WLAN Select “ON” or “OFF” to enable or disable 2.4G wireless LAN. Status SSID It is the wireless network name. The default SSID is “PLANET_2.4G”.
  • Page 40 User Manual of WDAP-C7200E AP1 enters the MAC address of AP2. And AP2 enters the MAC address of AP1. Then select the same Channel to establish the connection. Figure 5-15 Super WDS Mode – AP1 Figure 5-16 Super WDS Mode – AP2...

  • Page 41: Advanced

    User Manual of WDAP-C7200E Advanced Figure 5-17 Advanced 5.6.1 Device Status 5.6.1.1. Status Figure 5-18 Status The page includes the following fields: Object Description Software Version It shows the firmware version of AP. Hardware Version It shows the hardware version of AP.
  • Page 42 User Manual of WDAP-C7200E 5.6.1.2. 2.4G / 5.8G Wireless Status Figure 5-19 Wireless Status The page includes the following fields: Object Description 2.4G / 5.8G Wireless Status It shows the wireless status is Enable or Disable. SSID It shows the SSID of the AP. Default is PLANET_2.4G or PLANET_5G.
  • Page 43 User Manual of WDAP-C7200E 5.6.1.3. LAN Status Figure 5-20 LAN Status The page includes the following fields: Object Description LAN IP It shows the IP of the AP. Default is 192.168.1.253. Subnet Mask It shows the subnet mask of the AP. Default is 255.255.255.0.

  • Page 44: G / 5.8G Wireless

    User Manual of WDAP-C7200E 5.6.2 2.4G / 5.8G Wireless 5.6.2.1. 2.4G / 5.8G Basic Settings -37-...
  • Page 45 User Manual of WDAP-C7200E Figure 5-21 Basic Settings The page includes the following fields: Object Description Wireless Status It shows the wireless status is Enable or Disable. SSID It shows the SSID of the AP. Default is PLANET_2.4G or PLANET_5G.
  • Page 46 User Manual of WDAP-C7200E 5.6.2.2. Virtual AP Figure 5-22 Virtual AP The page includes the following fields: Object Description Wireless Status It shows the wireless status is ON or OFF. SSID It shows the SSID of the AP. Default is PLANET_2.4G_1 or PLANET_5G_1.
  • Page 47 User Manual of WDAP-C7200E 5.6.2.3. Access Control Figure 5-23 Access Control - Access All Figure 5-24 Access Control – Allow Listed The page includes the following fields: Object Description Access Control Select MAC Access All, Allow Listed or Deny Listed.
  • Page 48 User Manual of WDAP-C7200E 5.6.2.4. Advanced Settings Figure 5-25 Advanced Settings -41-...
  • Page 49 User Manual of WDAP-C7200E The page includes the following fields: Object Description Regional It shows FCC or ETSI depending on the firmware. Mode Select 802.11N/G or 802.11B/G in 2.4G AP. Select 802.11A or 802.11AN in 5G AP. RF Output Power The range of transmit power is 100%, 75%, 50%, 25% or 12.5%.

  • Page 50: Network

    User Manual of WDAP-C7200E 5.6.3 Network 5.6.3.1. LAN Settings Figure 5-26 LAN Settings The page includes the following fields: Object Description Enter an IP address of LAN. Subnet Mask Enter a subnet mask of LAN. 5.6.3.2. VLAN Figure 5-27 VLAN...

  • Page 51: Management

    User Manual of WDAP-C7200E 5.6.3.3. SNMP Figure 5-28 SNMP The page includes the following fields: Object Description Read Community Enter the read community, default is public Write Community Enter the write community, default is private Trap Destination Address Enter the SNMP trap IP address, default is 192.168.1.1 5.6.4 Management...
  • Page 52 User Manual of WDAP-C7200E 5.6.4.2. Logs Figure 5-30 Logs The page includes the following fields: Object Description Remote Log Server Enable remote log server Enter the IP of remote log server Refresh Press to refresh the system log Clear Press to clear the system log...
  • Page 53 User Manual of WDAP-C7200E 5.6.4.3. Upgrade Firmware Figure 5-31 Upgrade Firmware The page includes the following fields: Object Description Choose File Press to select the firmware file Upgrade Press to upgrade the firmware Restore Factory Settings Select to reset the device to default when upgrading firmware 5.6.4.4.
  • Page 54 User Manual of WDAP-C7200E The page includes the following fields: Object Description Backup Press to back up the configuration Choose File Press to select the configuration file Restore Press to restore the configuration Reset Default Press to reset the device to default...
  • Page 55 User Manual of WDAP-C7200E 5.6.4.5. User Figure 5-33 User The page includes the following fields: Object Description Old Password Enter the old password Password Enter the new password Confirm Password Enter the new password again -48-...

  • Page 56: Chapter 6.Quick Connection To A Wireless Network

    User Manual of WDAP-C7200E Chapter 6. Quick Connection to a Wireless Network In the following sections, the default SSID of the WDAP-C7200E is configured to “default”. Windows XP (Wireless Zero Configuration) Step 1: Right-click on the wireless network icon displayed in the system tray Figure 6-1 System Tray –...
  • Page 57 User Manual of WDAP-C7200E Step 4: Enter the encryption key of the wireless AP (1) The Wireless Network Connection box will appear (2) Enter the encryption key that is configured in section 5.7.2.1 (3) Click the [Connect] button Figure 6-3 Entering the Network Key Step 5: Check if “Connected”...

  • Page 58: Windows 7 (Wlan Autoconfig)

    User Manual of WDAP-C7200E Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 that can be used to detect and connect to wireless network. This built-in wireless network connection tool is similar to wireless zero configuration tool in Windows XP.
  • Page 59 User Manual of WDAP-C7200E Step 4: Enter the encryption key of the wireless AP (1) The Connect to a Network box will appear. (2) Enter the encryption key that is configured in section 5.7.2.1 (3) Click the [OK] button. Figure 6-7 Typing the Network Key...
  • Page 60 User Manual of WDAP-C7200E Step 5: Check if “Connected” is displayed. Figure 6-9 Connected to a Network -53-...

  • Page 61: Mac Os X 10.X

    User Manual of WDAP-C7200E Mac OS X 10.x In the following sections, the default SSID of the WDAP-C7200E is configured to “default”. Step 1: Right-click on the network icon displayed in the system tray The AirPort Network Connection menu will appear.
  • Page 62 User Manual of WDAP-C7200E Step 4: Enter the encryption key of the wireless AP (1) Enter the encryption key that is configured in section 5.7.2.1 (2) Click the [OK] button. Figure 6-12 Enter the Password If you will be connecting to this Wireless AP in the future, check [Remember this network].
  • Page 63 User Manual of WDAP-C7200E Step 5: Check if the AirPort is connected to the selected wireless network. If “Yes”, then there will be a “check” symbol in front of the SSID. Figure 6-13 Connected to the Network -56-...
  • Page 64 User Manual of WDAP-C7200E There is another way to configure the MAC OS X wireless settings: Step 1: Click and open the [System Preferences] by going to Apple > System Preference or Applications Figure 6-14 System Preferences Step 2: Open Network Preference by clicking on the [Network] icon...
  • Page 65 User Manual of WDAP-C7200E Step 3: Check Wi-Fi setting and select the available wireless network (1) Choose the AirPort on the left menu (make sure it is ON) (2) Select Network Name [default] here If this is the first time to connect to the Wireless AP, it should show “No network selected”.

  • Page 66: Iphone/Ipod Touch/Ipad

    User Manual of WDAP-C7200E iPhone/iPod Touch/iPad In the following sections, the default SSID of the WDAP-C7200E is configured to “default”. Step 1: Tap the [Settings] icon displayed in the home screen Figure 6-17 iPhone – Settings icon Step 2: Check Wi-Fi setting and select the available wireless network...
  • Page 67 User Manual of WDAP-C7200E Figure 6-19 Wi-Fi Setting – Not Connected Step 3: Tap the target wireless network (SSID) in “Choose a Network…” (1) Turn on Wi-Fi by tapping “Wi-Fi” (2) Select SSID [default] Figure 6-20 Turning on Wi-Fi -60-...
  • Page 68 User Manual of WDAP-C7200E Step 4: Enter the encryption key of the Wireless AP (1) The password input screen will be displayed. (2) Enter the encryption key that is configured in section 5.7.2.1 (3) Tap the [Join] button. Figure 6-21 iPhone -- Entering the Password...
  • Page 69 User Manual of WDAP-C7200E Step 5: Check if the device is connected to the selected wireless network. If “Yes”, then there will be a “check” symbol in front of the SSID. Figure 6-22 iPhone -- Connected to the Network -62-...

  • Page 70: Appendix A: Planet Smart Discovery Utility

    User Manual of WDAP-C7200E Appendix A: Planet Smart Discovery Utility To easily list the WDAP-C7200E in your Ethernet environment, the Planet Smart Discovery Utility is an ideal solution. The following installation instructions guide you to running the Planet Smart Discovery Utility.

  • Page 71: Appendix B: Faqs

    User Manual of WDAP-C7200E Appendix B: FAQs Q1: How to Set Up the AP Client Connection Topology: Step 1. Use static IP in the PCs that are connected with AP-1(Site-1) and AP-2(Site-2). In this case, Site-1 is “192.168.1.100”, and Site-2 is “192.168.1.200”.
  • Page 72 User Manual of WDAP-C7200E Step 2. In AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP is changed to 192.168.1.252. Step 3. In AP-1, go to “Wizard” to configure it to AP Mode. In AP-2, configure it to Repeater Mode.
  • Page 73 User Manual of WDAP-C7200E Step 5. Click “Next” to finish the setting. Step 6. Click “Device Status” to check connection status. -66-...
  • Page 74 User Manual of WDAP-C7200E Step 7. Use command line tool to ping each other to ensure the link is successfully established. From Site-1, ping 192.168.1.200; and in Site-2, ping 192.168.1.100. Step 8. Configure the TCP/IP settings of Site-2 to “Obtain an IP address automatically”.
  • Page 75 User Manual of WDAP-C7200E Step 9. Use command line tool to ping the DNS (e.g., Google) to ensure Site-2 can access internet through the wireless connection. The following hints should be noted: The encryption method must be the same as that of both sites if configured.

  • Page 76: Q2: How To Set Up The Wds Connection

    User Manual of WDAP-C7200E Q2: How to Set Up the WDS Connection Topology: -69-...
  • Page 77 User Manual of WDAP-C7200E Step 1. Use static IP in the PCs that are connected with WDAP-C7200E-1 (Site-1) and WDAP-C7200E -2 (Site-2). In this case, Site-1 is “192.168.1.100”, and Site-2 is “192.168.1.200”. -70-...
  • Page 78 User Manual of WDAP-C7200E Step 2. In AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP is changed to 192.168.1.252. Step 3. In both APs, go to “Wizard” to configure it in Super WDS Mode.
  • Page 79 User Manual of WDAP-C7200E Step 5. Click “Apply” to finish the setting. Step 6. Click “Return home” to check WDS status. -72-...
  • Page 80 User Manual of WDAP-C7200E Step 7. Use command line tool to ping each other to ensure the link is successfully established. From Site-1, ping 192.168.1.200; and in Site-2, ping 192.168.1.100. The following hints should be noted: The encryption method must be the same as that of both sites if configured.

  • Page 81: Appendix B: Troubleshooting

    User Manual of WDAP-C7200E Appendix B: Troubleshooting If you find the AP is working improperly or stop responding to you, please read this troubleshooting first before contacting the dealer for help. Some problems can be solved by yourself within a very short time.
  • Page 82 User Manual of WDAP-C7200E Scenario Solution Try to use IP address instead of host name. If you can use IP address to communicate with a remote server, but can’t use host name, please check DNS setting. a. ‘Broadcast ESSID’ set to off? I can’t locate my AP by my...

  • Page 83: Appendix C: Glossary

    User Manual of WDAP-C7200E Appendix C: Glossary  802.11ac wireless networking 802.11 under the - 802.11ac is a standard in the family (which is marketed brand name Wi-Fi), developed in the IEEE Standards Association process, providing high-throughput wireless local area networks...
  • Page 84 User Manual of WDAP-C7200E  NAT (Network Address Translation) - NAT technology translates IP addresses of a local area network to a different IP address for the Internet.  PPPoE (Point to Point Protocol over Ethernet) - PPPoE is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection.
  • Page 85 EC Declaration of Conformity English Lietuviškai Hereby, PLANET Technology Corporation, Šiuo PLANET Technology Corporation,, skelbia, declares that this 11ac Wireless AP is in kad 11ac Wireless AP tenkina visus svarbiausius compliance with the essential requirements and 2014/53/EU direktyvos reikalavimus ir kitas svarbias other relevant provisions of Directive 2014/53/EU.

Table of Contents