Quick Installation Guide
WNAP-7206
802.11a/n Wireless Outdoor AP
1. Package Contents
Thank you for choosing PLANET WNAP-7206. Before
installing the AP, please verify the contents inside the
package box.
WNAP-7206
Quick Guide
Power Adapter
PoE Injector
If there is any item missed or damaged, please
contact the seller immediately.
Note
3. Physical Introduction
Rear Panel Description – LED Indication
Power LED
LAN Port LED
Rear Panel Description – Port & Connector
LAN Port
(Connect to PC via PoE Injector)
RP-SMA Connector
(Connect to External Antenna)
CD-ROM
Mounting Tie x 2
– 1 –
Signal Indicator
Reset
Grounding Terminal
– 3 –
2. Installation Precautions
1. Users MUST use a proper and well-installed surge
arrestor
and
grounding
otherwise, a random lightening could easily cause fatal
damage to WNAP-7206. EMD (Lightning) DAMAGE
IS NOT COVERED UNDER WARRANTY.
2. Users MUST use the "Power Adapter & PoE Injector"
shipped in the box with the WNAP-7206. Use of other
options will cause damage to the WNAP-7206.
3. Users MUST power off the WNAP-7206 first before
connecting the external antenna to it; otherwise,
damage might be caused to the WNAP-7206 itself.
4. Hardware Installation
STEP 1: Push the latch in the bottom of WNAP-7206 to
remove the sliding cover.
STEP 2: Plug the RJ-45 Ethernet cable into the LAN Port
of WNAP-7206.
kit
with
WNAP-7206;
– 2 –
– 4 –