Emerson HIGHPOINTE CF205BS01 Owner's Manual page 10

d. Securely connect the fan motor white
wire to the receiver white (TO MOTOR
N) wire.
e. Securely connect the fan motor black
wire to the receiver red (TO MOTOR L)
wire.
f. Securely connect the fan motor blue
wire to the receiver blue (FOR
LIGHT) wire.
SUPPLY BLACK
WIRE (HOT)
GROUND WIRE
GREEN GROUND
WIRE FROM
HANGER BALL
ANTENNA
GREEN GROUND
WIRE FROM
HANGER BRACKET
1-1/4" THREADED
STUD (2)
Figure 17
BLACK
TO
(HOT)
120-
VOLT
SUPPLY
WHITE
GROUND
Figure 18
SUPPLY WHITE WIRE
(NEUTRAL)
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL SW406
WALL CONTROL
TWO-CONDUCTOR
CABLE (WITH
GROUND)
GREEN WIRE (GROUND)
FROM HANGER BALL AND
HANGER BRACKET
Check to see that all connections are
tight, including ground, and that no
bare wire is visible at the wire con-
nectors, except for the ground wire.
Do not operate fan until blades are in
place. Noise and fan damage could
result.
RECEIVER WHITE
WIRE
FAN
BLACK
WIRE
FAN BLUE WIRE
FAN WHITE WIRE
BLACK
BLACK
WHITE
RED
10
WARNING
!
RECEIVER
BLACK WIRE
RECEIVER RED WIRE
RECEIVER BLUE
WIRE
RECEIVER WHITE WIRE
WHITE
BLUE
WHITE
BLACK
BLUE
WHITE
HANGER BALL
U.L. Model No.: CF205