Installing Cabinet - Epson PhotoPC 800 Service Manual

EPSON PhotoPC 800

4.3.10 Installing Cabinet

1. Install the "Cabinet Top" on the SY1 board. (Positioning points; 4 )
Cabinet Top
SY1 Board
Figure 4-20. Installing Cabinet Top
2. Install "Shaft Strap" to "DEC RIGHT".
Holder Battery
dis19
Figure 4-21. Installing the Shaft Strap
Disassembly and Assembly
dis18
Pad
Shaft Strap
Positions
for pad
DEC Right
Screw
(1.7x4)
Assembly Procedure
3. Fix the "DEC Right" to the "Holder Batt" by one screw (1.7x4). (Tightening
±
torque: 1.3 0.2 kgf-cm)
4. Hang the hook of "Holder Terminal" on the power supply jack connector of
PW board, and fix it to the "Holder Lens" with one screw (1.7x4, black).
±
(Tightening torque: 1.3 0.2 kgf-cm)
5. Attach the Pad to the "Holder battery". (See Figure 4-21)
Jack
connector
Hook of Holder
Figure 4-22. Installing the Holder Terminal
Revision A
dis20
Holder Lens
Screw
(1.7x4,black)
Terminal
Holder
Terminal
71