Assembly; Installing Parts To The (Front) Cabinet - Epson Photo PC-750Z Service Manual

EPSON PhotoPC-750Z

4.1.5 Assembly

Here explains the assembly of PhotoPC-750Z. Since the assembly
process is relatively complicated, procedures for disassembly and
assembly are explained individually.
Refer to Table4-1 and perform the proper adjustments
after replacing and assembling the corresponding
units or parts. Also, the performance of the second
maintenance is allowed to be done only by
EPSON.Co.,Ltd.

4.1.5.1 Installing parts to the (front) Cabinet

1. Set the Grip to the front cabinet, and fix them by 2 screws from the
inside of the cabinet.
2. Set the tripod holder from the inside of the cabinet, and fix it by one
screw (102).
3. Install the cover lens from the front cabinet, and fix it by 2 screws
from the inside of the cabinet.
Disassembly and Assembly
Figure 4-7. Parts Installation to the Cabinet (front)
Overview
Revision A
45