Installing The Cabinet Top - Epson PhotoPC 3000Z Service Manual

EPSON PhotoPC 3000Z

4.3.3 Installing the CABINET TOP

1. Install the ST1 board (1) to the CABINET TOP and secure it with 1 screw
(2) (2.0x5).
2. Connect the pin to ST1 board.
Hold the pin when soldering the pin so that the pin does
C H E C K
not get off. (See Figure 4-9.)
P O I N T
When soldering the pin, be sure that the soldering part is
shorter than the length of pin. (See Figure 4-9.)
3. Secure the CABINET TOP to the CABINET FRONT with 3 screws (3)
(1.7x5).
Disassembly and Assembly
Figure 4-9. Installing the CABINET TOP
Assembly
Revision A
pin
Solder the pin within the length of the pi
66