Epson PhotoPC 800 Service Manual page 60

EPSON PhotoPC 800
4.2.0.3 CA1 Board and Lens Assembly Removal
Here explains disassembly of CA1 board and Lens Assembly. Follow the order
shown in the figure.
When assembling the optical filter, be careful of its
direction, since it has a determined direction to be installed.
(See "Assembling the Lens Assembly" on page -63)
Disassembly and Assembly
4.Screw
1.7x4
Figure 4-4. SY1 board and Lens Assy. Removal
Disassembly and Assembly
1.Screw 1.7 x4
2.Control Panel
A
13.Connector
12.FPC
10.FPC
3. Open the
cover CF.
9.Remove
the solder
Optical filter
Revision A
JEP-2
5.Screw
1.7x4
6.Heat sink
rubber A
8.Screw
A
2x6
7.Screw
2x2.5
11.CA1 board
60