Installing Cover Battery; Installing Unit Control Panel - Epson PhotoPC 800 Service Manual

EPSON PhotoPC 800

4.3.8 Installing Cover Battery

Fix the "Cover Battery" to the "Holder CF" by 4 screws (1.7 x 4, black).
±
(Tightening torque: 1.3 0.2 kgf-cm)
Holder CF
dis16
Figure 4-18. Installing Cover Battery
Disassembly and Assembly
Cover
Battery
Screw(1.7x4, black)
Assembly Procedure

4.3.9 Installing Unit Control Panel

1. Put the FPC of "Unit Control Panel" to the LCD below.
2. Install the "Unit Control Panel" and fix it with 2 screws(1.7x4) (See 2 and 3
in the figure) (Tightening torque: 1.0
3. Install the dial switch and insert FPC. Then, fix it with one screw (1.7x4)
(See 4 in the figure). (Tightening torque: 1.0
NOTE: Tighten the screws 2, 3, and 4 in that order.
Put the blue
part to corner
of LCD first
Figure 4-19. Installing Unit Control Panel
Revision A
±
0.2 kgf-cm)
±
0.2 kgf-cm)
Unit Control
Panel
dis17
70