Table of Contents
Advertisement
How to install frames from the memory card to the camera's memory or vice
versa. You can store up to 5 frames in the camera.
Using the ▲▼ buttons, select "P.I.F.
Frames" then press either the
button or the FLASH button.
When you want to install frames
from the memory card to the
camera use the
"In Memory Card", then use the ▲▼
buttons to select the desired frame.
Pressing the MACRO button will delete the frame.
To transfer the frames stored in the camera use
the button to select "In Camera." Use the ▲▼
buttons to select the frames you want.
Pressing the MACRO button will delete the frame.
Once you press the FLASH button, a confirmation message
will appear on the monitor. Press the FLASH button again to
install the frame.
Press the MACRO button to stop the process.
If there is not enough memory space available on either the camera or the memory card, the
messages "Not enough free space on the memory card" or "Not enough free space in the
camera's memory" will appear on the monitor. In this case, you must delete any frames you don't
need in order to make enough room for another frame.
INSTALLING FRAMES
Turn the DIAL SWITCH to SET UP MODE and
then turn the POWER ON.
button to choose
49
Advertisement
Table of Contents
