NEC Univerge SV8100 Reference Sheet page 2

CALL FORWARD ALL
Forwards all calls immediately.
To Set:
Press the speaker Key and press the Forward key
Dial 1 to set
Dial the destination number
Press the Speaker key to complete
To Cancel:
Press the Speaker key and press the Forward key
Dial 0 to cancel
Press the Speaker key to complete
CALL PICKUP
**
Lift the handset and dial plus the ringing
extension number
CALL PARK
To Park a call:
While actively on a call press the hold button
Press the park key, then the park location(01, 02 etc)
Hang up the handset
To pickup a Parked Call:
Press the Park Ans button
Dial the 2 digit park location (ex. 01, 02)
SHORTCUT MENU
The user can access the shortcut menu by pressing the
Enter key (center cursor button)
PROGRAMMING SPEED NUMBERS
To store a station speed dial number (display phones
only)
Press Speaker
Dial 755
Enter the speed dial buffer number
Dial 9+ the external telephone number you want to
store
Press Hold
If desired enter name using dial pad
Press Hold
Press speaker to hang up
TO DIAL A STATION SPEED DIAL NUMBER
Without lifting the handset press #7 then the
speed dial buffer number
Lift handset and converse
TO DIAL A SYSTEM SPEED DIAL NUMBER
Without lifting the handset press #2 or redial
then the speed dial buffer number
Lift handset and converse
DISPLAY
To adjust the display:
Press the Cursor button up or down while the tele-
phone is idle
SPEAKER/RECIVER VOLUME
To adjust the Speaker/Receiver volume:
Press the cursor button up or down during conversation
RINGER VOLUME
To adjust the ringer volume:
Press the Cursor button up or down during ringing.
ANSWER A SECOND CALL
Answer Hold allows a multiline terminal user to press
the flashing Answer Key to answer an incoming ringing
call. When the multiline terminal user is already on a
call, the first call is automatically placed on hold.
Receive a CO/DID/DIL incoming ring, the Answer key
flashes
Press Answer to access the new call, the Answer LED
goes out and the original call is put on hold
If additional calls are received press Answer to the
place current call on hold and connect to the next as
long as Call Appearance Keys and/or CO Line keys are
available
CELL ON/OFF
To have calls ring through to both the office phone and
cell phone at the same time:
Press the "Cell On" key
To turn off press the Cell Off key then press Speaker
To answer a call via cell: Answer call then press *
If unanswered the call goes to the office voicemail
CHANGE RINGTONE
Press Speaker
Dial Feature 720
Dial 1 for internal calls or 2 for external calls
Press digits 1-8 to toggle through ring tone options
Once desired tone is selected press speaker to save