Table of Contents
Advertisement
Chapter 3. Installing internal options
Removing the cover
© Copyright IBM Corp. 2000
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When adding an option, use these instructions along with the
instructions that come with the option.
Important:
Read "Safety Information" on page v and "Handling static-sensitive devices"
on page 6 before removing the cover.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Pull out on the cover-release latch and slide the cover panel toward the rear of
the computer.
15
Advertisement
Table of Contents
