Figure 35 Scc System Options Screen; Figure 36 Mmu System Options Screen - Liebert 1000kVA Operation & Maintenance Manual

To change the Maximum Auto-Retransfer Attempts parameter, do the following at the SCC:
1. From the System Configuration Screen, press the Up or Down pad to highlight Maximum Auto-
Retransfer Attempts.
2. Press the Select pad. The screen above will appear.
3. Press the Up pad to increase the value or the Down pad to decrease it.
4. Press the Select pad to set the value and to return to the System Configuration screen.
System Current Rating
System current rating is determined by the part number, which is entered at the factory and cannot
be changed. Once it has been entered, the part number determines the value displayed for the System
Current Rating on the SCC system configuration screen (see Figure 29).
Language Selection
English and Portuguese are supported.
System Options

Figure 35 SCC system options screen

Figure 36 MMU system options screen

SYSTEM OPTIONS
EXIT
LCD Contrast
Backlight Brightness
Customer Alarm Interface Board................................NO
Continuous Duty Static Switch .................................YES
SYSTEM OPTIONS
EXIT
LCD Contrast
Backlight Brightness
Battery Temp. Compensated Charging...................... NO
Battery Test .............................................................. YES
UP: CURSOR UP
DOWN: CURSOR DOWN
SELECT: CHOOSE
UP: CURSOR UP
DOWN: CURSOR DOWN
SELECT: CHOOSE
49
Operation