Enerzone Solution 1.3 Installation And Operation Manual page 49

When using the optional fan manually, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the fan cools the firebox
and could affect the start-up combustion efficiency if the fan is turned on too early. An optional
thermodisc kit is provided with the fan to enable the blower to start or stop automatically when the
stove is hot or too cold.
Detailed instructions for installing the fan and thermodisc (detail A) are provided with each of these
accessories.
CAUTION: ENSURE THAT THE FAN'S POWER CORD IS NOT IN CONTACT WITH ANY
SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT
RUN THE POWER CORD BENEATH THE STOVE.
49
Solution 1.3 Installation and Operation Manual