Installing The Software; Installing The Digital Video Software - Canon optura300 Instruction Manual

Installing the Digital Video Software
o
Before you attach the camcorder to the computer with the USB cable
for the first time, you must install one of the following drivers onto the
computer.
Windows 98/\Nindows 2000: TWAIN Driver (CIJ 17)
Windows Me: WIA Driver (IIl18)
o
Users of Windows 2000 or Windows XP must first log in as an
Administrator to install programs.
Windows XP Users:
Your digital video camcorder is equipped with the standard Picture
Transfer Protocol (PTP). This protocol enables you to download still images
(JPEG) by simply connecting the camcorder to a computer with the USB
cable (the software such as the [Scanner and Camera Wizard] starts
automatically).
However, please note that there are several limitations to downloading
images with this method. To avoid these problems, install Zoom Browser
EX to download images.
o
It may take a few minutes, after connecting the camcorder, until you
can download images.
o
Images protected on the camcorder may lose this setting once they are
downloaded to the computer.
1.
Close any programs that are running.
2.
Set the DIGITAL VIDEO SOLUTION DISK For Windows in the
computer's CD-ROM drive.
• The installer panel opens automatically.
• If
the installer panel does not appear automatically, use the following
procedures to display it.
Windows 98, Windows Me, Windows 2000:
1. Double-click the [My Computer] icon.
2. Right-click the CD-ROM icon and select [Open] from the displayed
menu.
3. Double-click the [Setup.exe] icon.
13