System Requirements - Canon optura300 Instruction Manual

I
System Requirements
CPU:
Display:
Others:
RAM:
Interface:
Free Hard Disk Space:
os:
Microsoft Windows XP Home Edition or Professional
(Installation of Service Pack 1 recommended)
Proper operation is not guaranteed on Windows XP
that has been upgraded from a previous version.
Pentium 500 MHz or better (800 MHz or better
recommended)
128 MBor more (256 MB or more recommended)
USB (1.1/2.0) or IEEE1394 (OHCI compliant)
• DV Messenger: 100 MB or more
• Canon USB Video Driver: 1 MB or more
• AV/C Camera Storage Subunit-WIA Driver: 1 MB or
more
800 x 600 pixels/High Color (16 bit) or better
Windows Messenger Version 4.5, 4.6 or 4.7, sound
function, Internet connection*
* Using a standard dial-up connection is possible, but
we recommend using a broadband connection to the
Internet.
o
Proper operation is not guaranteed on a dual CPU PC or on a user-built
Pc.
o
Proper operation is not guaranteed on any particular system, even if it
meets the requirements outlined above.
ODo not connect two or more camcorders to the computer at the same
time. The connection may not work correctly.
OA CD-ROM drive is required to install the software.
USB connection:
OConnect the USB cable directly to one of the computer's main USB ports.
The interface may not function correctly if the camcorder is connected via
a USB hub.
OThe connection may not operate correctly if you are using other USB
devices, excluding USB mice or keyboards, at the same time. If this occurs,
disconnect the other devices from the computer and try reconnecting the
camcorder.
o
Not all operations performed with a connection to a USB 2.0 compatible
board can be guaranteed.
DV (IEEE1394) connection:
o
Connect the camcorder directly to the computer using a DV (lEEE1394)
cable. The connection may not operate correctly if the camcorder is
connected via a repeater or other IEEE1394 devices, or if more than one
IEEE1394 device is connected to the computer.
o
Do not connect another IEEE1394 device while the AV/C Camera Storage
Subunit-WIA Driver is operating. The connection may not operate
correctly.
9