Canon optura300 Instruction Manual page 137

a
Cancel Printing
Press the P.SET button while "NOW PRINTING" is displayed. A confirmation
dialog appears. Select [OK] and press the P.SET button. Printing stops even if it
is incomplete and the paper is fed through.
a
Printing Errors .
- If an error occurs during the printing process, an error message appears
(CD
150).
- Bubble Jet Printer: With most errors, printing resumes automatically after
you correct the error. If the error persists, press the P.SET button to cancel
printing. Refer also to the printer manual for details.
- Card Photo Printer: Select [STOP] or [RESTART] and press the P.SET button.
(The [RESTART] setting may not appear with some error messages. In that
case, select [STOP].) Refer also to the printer manual for details.
- If the error still persists and printing does not restart, follow below
procedure:
1. Disconnect the cable.
2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3. Reconnect the cable.
a
When you have finished printing:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.
~1e,'t;~D;tbAe~1"J'Jlb~'lfMtC~P\ie~BtKKtiml;n;Ht%iBit1%1i1%1101tt:0ttfnUifK21&1MW&tJillWk@'@JMBM<ttiiiLY&]iWAEfiWiN!tW@
A maximum of 9 copies can be selected for one still image.
1. In the print setting menu, press the 6. button to
select [COPIES] and press the
~SET
button.
2. Press the 6. or 'V
button to select the number of
copies and press the
~SET
button.
-
137