Installing The Software; Installing From The Digital Video Solution Disk - Canon Elura 50 User Manual

Installing the Software

Installing from the DIGITAL VIDEO SOLUTION DISK

❍ Before you attach the camcorder to the computer with the USB
cable for the first time, you must install one of the following drivers
onto the computer.
Windows 98/Windows 2000: TWAIN Driver (
Windows Me: WIA Driver (
❍ Users of Windows 2000 or Windows XP must first log in as an
Administrator to install programs.
Windows XP Users:
Your digital video camcorder is equipped with the standard Picture
Transfer Protocol (PTP). This protocol enables you to download image
by simply connecting the camcorder to a computer with the USB cable
(the software such as the [Scanner and Camera Wizard] starts
automatically).
However, please note that there are several limitations to downloading
images with this method. To avoid these problems, install ZoomBrowser
EX to download images.
❍ It may take a few minutes, after connecting the camcorder, until you
can download images.
❍ Only AVI* movie files can be downloaded. Thumbnails cannot be
downloaded.
* Two files are created in the camcorder (for example:
[MVI_0001.AVI] and [MVI_0001.THM]). [MVI_0001.THM] files
cannot be downloaded but movies can still be played back on the
computer.
❍ Images protected on the camcorder may lose this stetting once they
are downloaded to the computer.
1.
Close any programs that are running.
2.
Set the DIGITAL VIDEO SOLUTION DISK in the computer's CD-
ROM drive.
• The installer panel opens automatically.
• If the installer panel does not appear automatically, use the following
procedures to display it.
Windows 98, Windows Me, Windows 2000:
1. Double-click the [My Computer] icon.
2. Right-click the CD-ROM icon and select [Open] from the displayed
menu.
3. Double-click the [Setup.exe] icon.
10
15)
14)