Canon optura300 Instruction Manual page 136

3. Set the camcorder to CARD PLAY (VCR) mode.
Wait until the card access indicator stops flashing.
4. Connect the camcorder to the printer using the cable.
=
appears and changes to
II
~ ~
II
when the printer is properly connected to
the camcorder. (Does not appear with movies, or still images that cannot be played back
with the camcorder.)
o
If
=
continues to flash (for more than 1 minute), the USB connection mode is
not correctly set in the menu, or the camcorder is not correctly connected to the
printer. In such case, 1) open the menu and make sure that [USB CONNECT] is
set to [STANDARD], and 2) disconnect the cable from camcorder and printer, turn
off camcorder and printer, turn both back on and reconnect the camcorder to
the printer.
o
Do not press the CARD STILUMOVIE button while a printer is connected to the
camcorder.
6., \J,
<l,
l>
buttons
GARD PLAY (VGR)
menu.
1. During still image playback, select the still image
you wish to print and press the RSET button.
• The print setting menu appears.
• Depending on the printer, the message
II
Printer warming Upll
may appear before the camcorder displays the print setting
en
s::::
'+:i
'2
~
2. Select the print settings
(CO
138).
tJ
! 3. Select [PRINT] and press the RSET button.
C
Printing starts. The print setting menu disappears when printing is complete.
-
136