Playing Back On A Tv Screen - Canon optura300 Instruction Manual

Playing Back on a TV Screen
You can connect the camcorder to a TV or VCR to play back your recordings on a TV
screen.
o
Make sure that
II\}"
is not displayed on the screen. If
11\1"
is displayed, change
the setting (CO 74).
o
When you use the TV as a monitor during recording, keep the TV volume
turned down as long as the camcorder's audio terminals are connected. An
unpleasant high-pitched squeal, called feedback, may be produced if sound
from the TV speakers is picked up by the microphone.
_ 0 For high picture quality, we recommend using a TV with an 5 (51) terminal.
LS
0 TVs with 51-terminal or Video ID-1 system: Recordings made in the 16:9 mode
([lJ 50) will be automatically played back in widescreen mode.
INPUT
8(81 )-VIDEO
Signal flow
q
Signal flow
q
STV-250N Stereo Video Cable
(supplied)
~..
..
..
S-150 S-video Cable (supplied)
VIDEO
~
AUDIO
r~JL
_-------IIF--oIIIilII1llP-+•
R
lll,itmwltbmSELS3)£i~ldg\QrJ!gJ;lU1i@I'etmingJwm;z~f0B\10tillBB%tKtltmiiilittl?dtlKiEillilltiUWZWWWi11illMih1lfiE
-
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the 5-150 5-video Cable to the S-video terminals.
39