Canon optura300 Instruction Manual page 135

Printing Still Images (Direct Printing}
[Iii
You can print still images
by
connecting the camcorder to a printer with Direct Print
function or to a PictBridge-compliant printer. You can also use the print order settings
for direct printing
(OJ
142).
You can connect Canon Card Photo Printers with the
~
logo, Canon Bubble Jet
Printers with the
rJ
logo and printers with the
r(
PictBridge
logo.
~D;
0 Observe the following precautions during printing, otherwise printing may not
be performed correctly.
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch. '
- Do not detach the cable.
- Do not open the memory card cover or remove the memory card.
a
Do not connect the camcorder to a printer when [USB CONNECT] is set to
[STORAGE], or in movie playback mode even when [USB CONNECT] is set to
[STANDARD] mode.
a
Do not connect the camcorder to a printer when the camcorder is set to
NETWORK mode.
a
Images not recorded with this camcorder, uploaded from a computer, edited
on a computer and images whose file names have been changed may not be
printed correctly.
a
Refer to the instruction manual of each printer for information on which
interface cable to use with the camcorder.
The Card Photo Printers CP-1 0 and CP-1 00 are supplied with two direct
interface cables. Use the cable with the USB logo on the connector (DIF-1 00).
a
We recommend powering the camcorder from a household power source.
a
Refer also to the instruction manual of the respective printer.
Printer with
direct print function
l====~;~"
1. Turn off the camcorder and insert a memory card that contains still images.
2. Connect a power source to the printer and turn on the printer.
-
135