Canon optura300 Instruction Manual page 107

1ae,gld;iIlg.~.,@r.~;)tm@w.UJW~I::t.wt\4~"g;~~10$2JLLej~l'~~7JtJBWt<t%:mWM@jrtHmm@:mrt1tmfJtllH%.t0Pg,#&WiW!:!lJfW0.t:m:mmWffi.KffMWJ1i
You can record images from devices connected via the S-video terminal or AV terminal
(analog line-in function), or via the DV terminal as still images on a memory card.
When recording via the AV terminal, make sure that" AV-+OV" is displayed on
the screen. When recording via the OV terminal, make sure that" AV-+OV" is not
displayed. Change the setting as necessary (CO 93).
1. Connect the camcorder to the video device.
• S-video/AV terminal: See
Playing Back on
a
TV Screen (CO
39).
• OV terminal: See
Connecting
a
Digital Video Device (CO
88).
2. Set the camcorder to PLAY (VCR) mode.
If a cassette is loaded, make sure that the tape is stopped.
3. Connected device: Load a recorded cassette and play back the tape.
4. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
5. Press the PHOTO button fully.
• The card access indicator flashes.
• The still image shown on the screen will be recorded on the memory card.
a
A still image recorded from an image in 16:9 format will be vertically
compressed.
a
The data code of the still image will reflect the date and time it has been
recorded on the memory card.
a
There will be no shutter sound in PLAY (VCR) mode.
a
The size of the still image will be 640 x 480.
-
c
'" :i"
\C
lU
s:
tD
3
o
~
n
lU
a.
107