Four Slot Ethernet Cradle - Motorola MC70 User Manual

Enterprise digital assistant
Hide thumbs Also See for MC70:
Table of Contents

Advertisement

Four Slot Ethernet Cradle

Troubleshooting the Four Slot Ethernet Cradle
Table 7-4
Symptom
Attempt by the EDA to
ActiveSync failed.
During
communication, no
data transmits, or
transmitted data was
incomplete.
Cause
EDA removed from
Wait one minute and reinsert the EDA in the cradle. This allows the
the cradle while the
cradle to attempt another synchronization.
LED was blinking
green.
Using an outdated
Visit
version of
ActiveSync.
ActiveSync on the
Wait one minute and reinsert the EDA in the cradle. This allows the
host computer has
cradle to attempt another synchronization.
not yet closed the
previous
ActiveSync
session.
Incorrect cable
Ensure the correct cable (Ethernet) is used with the cradle.
configuration.
Communication
Perform setup as described in the MC70 Integrator Guide.
software improperly
configured.
EDA ActiveSync
On the EDA, tap
disabled or not
button. Then, uncheck the
configured to
check box.
accept network
connection.
Host ActiveSync
On the host computer, check
disabled or not
network (Ethernet) Server Connection with this desktop computer.
configured to
accept network
connection.
EDA removed from
Replace EDA in cradle and retransmit.
cradle during
communications.
EDA has no active
An icon is visible in the status bar if a connection is currently active.
connection.
Maintenance & Troubleshooting
Solution
http://www.microsoft.com
for the latest ActiveSync software.
>
Start
ActiveSync
Enable PC sync using this connection:
File
>
>
>
Tools
Options
Options
>
>
Connection Settings
Allow
7 - 7

Advertisement

Table of Contents
loading

Table of Contents