Chapter 7 Maintenance & Troubleshooting
Introduction
This chapter includes instructions on cleaning and storing the EDA, and provides troubleshooting solutions for
potential problems during EDA operation.
Maintaining the EDA
For trouble-free service, observe the following tips when using the EDA:
•
Do not scratch the screen of the EDA. When working with the EDA, use the supplied stylus or plastic-tipped
pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object
on the surface of the EDA screen.
Zebra recommends using a screen protector, p/n KT-67525-01.
•
The touch-sensitive screen of the EDA is glass. Do not to drop the EDA or subject it to strong impact.
•
Protect the EDA from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and
keep it away from heat sources.
•
Do not store or use the EDA in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the EDA. If the surface of the EDA screen becomes soiled, clean it with a soft
cloth moistened with a diluted window-cleaning solution.
•
Periodically replace the rechargeable battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.