Call Forward - Yealink SIP-T2 Series Administrator's Manual

To configure MoH via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Enter the SIP URI (e.g., sip:moh@sip.com) in the Music Server URI field.
5. Click Confirm to accept the change.
Call forward allows users to redirect an incoming call to a third party. IP phones redirect
an incoming INVITE message by responding with a 302 Moved Temporarily message,
which contains a Contact header with a new URI that should be tried. Three types of call
forward:
Always Forward -- Forward the incoming call immediately.

Busy Forward -- Forward the incoming call when the IP phone or the specified

account is busy.
No Answer Forward -- Forward the incoming call after a period of ring time.

Call forward can be configured on a phone or a per-line basis depending on the call
forward mode. The following describes the call forward modes:
Phone (default): Call forward feature is effective for the IP phone.

Custom: Call forward feature can be configured for each or all accounts.

The server-side call forward settings disable the local call forward settings. If the
server-side call forward feature is enabled on any of the IP phone's registrations, the
other registrations are not affected. DND activated on the IP phone disables the local no
Configuring Basic Features
181