Yealink SIP-T2 Series Administrator's Manual page 52

Administrator's Guide for SIP-T23 & T23P & T23G IP Phones
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration
File
Local
Details of Configuration Parameters:
auto_provision.power_on
Description:
Enables or disables the IP phone to perform an auto provisioning process when
powered on.
0-Disabled
1-Enabled
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
auto_provision.repeat.enable
40
<y0000000000xx>.cfg
Web User Interface
Parameters
Configure the way for the IP phone to
check for configuration files.
Parameters：
auto_provision.power_on
auto_provision.repeat.enable
auto_provision.repeat.minutes
auto_provision.weekly.enable
auto_provision.weekly.begin_time
auto_provision.weekly.end_time
auto_provision.weekly.dayofweek
Specify the access URL of firmware.
Parameter:
firmware.url
Configure the way for the IP phone to
check for configuration files.
Navigate to:
http://<phoneIPAddress>/servlet?p=s
ettings-autop&q=load
Permitted Values
0 or 1
0 or 1
Default
1
0