Yealink SIP-T2 Series Administrator's Manual page 92

Hide thumbs Also See for SIP-T2 Series:

Table of Contents

Administrator's Guide for SIP-T23 & T23P & T23G IP Phones

Select the desired value from the pull-down list of NTP by DHCP Priority.

Click Confirm to accept the change.

To configure the NTP server, time zone and DST via web user interface:

Click on Settings->Time & Date.

Select Disabled from the pull-down list of Manual Time.

Select the desired time zone from the pull-down list of Time Zone.

Enter the domain names or IP addresses in the Primary Server and Secondary

Server fields respectively.

Enter the desired time interval in the Synchronism (15~86400s) field.

Select the desired value from the pull-down list of Daylight Saving Time.

If you select Enabled, do one of the following:

Mark the DST By Date radio box in the Fixed Type field.

Enter the start time in the Start Date field.