Yealink SIP-T2 Series Administrator's Manual page 43

Details of Configuration Parameters:
Parameters
network.internet_port.type
Description:
Configures the Internet (WAN) port type for IPv4 when the IP address mode is
configured as IPv4 or IPv4&IPv6.
0-DHCP
1-PPPoE
2-Static IP Address
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4
network.pppoe.user
Description:
Configures the user name for PPPoE connection when the IP address mode is
configured as IPv4 or IPv4&IPv6, and the Internet port type is configured as PPPoE.
Example:
network.pppoe.user = xmyealink
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->PPPoE->User Name
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4->PPPoE IPv4 Client->PPPoE User
network.pppoe.password
Getting Started
Permitted Values Default
0, 1 or 2
String within 32
Blank
characters
String within 99
Blank
characters
0
31