Yealink SIP-T2 Series Administrator's Manual page 49

Details of Configuration Parameters:
Parameters
network.PC_port.enable
Description:
Enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiation
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Auto Negotiation from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
Permitted Values
0 or 1
Getting Started
Default
1
37